Hi! My problem is with Intel Celeron 333MHz, and mobo is 650B-ATX with Award BIOS chip - no display out and no beep codes. I had some issues with beep codes on the device, which I have finally resolved - RAM was not able to run with 66MHz FSB, so I changed FSB to 100MHz and set the CPU frequency from stock 333MHz on 66MHz FSB to 350MHz. I tested the power supply ( Chieftec Arena GPA-350S8 (350W) ) with another motherboard, and it works just fine. I also tested the... Fail to boot old PC - no error beeps, no display out. Weiterlesen...